HYPERLOW AIRSHOT

Description
Customer Reviews
Info

Recommended Parts & Assembly

UPDATE: 01/04/2021

- 6" Flat arms now available in prop free deadcat config. Select kit option above

- Armattan Marmotte Cage compatible (select option above, or conversion parts available here)

(the kit option DOES NOT SHIP WITH THE CAGE, you must use your own)

3D prints are now available as optional extras. Additional print time may be needed before shipping, but as always all designs are available:

FREE TO PRINT ON THINGIVERSE.

FREESTYLE • MIDRANGE • CINEMATIC • HD

5" or 6" Prop

Vert + flat arm pofiles

Fits 1250-2250 mah battery

HD capable

Front and rear GoPro mounting

RaceLites + RaceWire

Soft mount 20x20 + 30x30

Component shelving

X-fire Immortal-T mounts

Ummagrip or rubber battery pad

Front arm braces

Armattan cage compatible...

_______

Introducing the all new AirShot: an FPV platform designed for professionals and hobbyists alike to capture HD action cam footage for commercial projects or freestyle adventures.

The AirShot frame centers around accommodating the latest in component trends in order to adapt to all manner of flight styles.

This includes:

- The ability to carry up to ~110mm battery (~2250mah) for extended flight time and range.

- Multiple camera mounting positions; both above and below the FPV cam, and at the rear.

- Perfect clarity with room for the DJI digital FPV system (VISTA recommended)

- Vert profile arms for max freestyle thrust and performance

_______

FEATURES

Vert arm profile for minimal prop thrust obstruction with 4-in-1, or traditional flat arm for individual ESC mounting

Front 30x30 and rear underside 20x20 GoPro mount positions allow for both for chase and follow footage.

(Currently shipping with black 3d prints. Gray shown for clarity)

DJI HD capable

[VISTA recommended, see RS+ EX for AIR UNIT]

(use 12cm cam cable when placed at rear)

Component shelving keeps electronics isolated from carbon and allows for clean wire routing. Assembly bolts also provide direct 20x20 mounting.

Custom UV RaceLites and RaceWire from TINYSLEDS included

New construction design allows for modular front and rear cam and antenna choices

Optional front arm braces for increased durability.

(Fits both arm styles)

Compatible with all existing Hyperlow GoPro mounts available on Thingiverse, here, and Brain3d

We also teamed up with the Ummagawd Company to bring UMMAGRIP to the AirShot.

A 3mm thick custom cut is included in all kits, with an option for a 3mm textured rubber pad here at Hyperlow Frames

Kits also includes a Hyperlow microfiber lens cloth; an absolute must have to keep your footage crystal clear and streak free.

_________________________________________________

Any questions:

[email protected]

dm @richrd on instagram

404-543-7633

_________________

THINGIVERSE 3D PRINTS

_________________

ROTORBUILDS LOG

_________________

All Hyperlows use standard 30x30 mounting for GoPros

Standoff spacing for front FPV cam mounts is also 30mm

_________________

BETAFLIGHT DIFF from 2300kv 5s NBD F4 build on 4.2.4

board_name NBD_INFINITYF4
manufacturer_id NEBD

# name: AIRSHOT

# resources
resource MOTOR 1 A08
resource MOTOR 4 B01

# beeper
beeper -GYRO_CALIBRATED
beeper -RX_LOST
beeper -RX_LOST_LANDING
beeper -DISARMING
beeper -ARMING
beeper -ARMING_GPS_FIX
beeper -BAT_CRIT_LOW
beeper -BAT_LOW
beeper -GPS_STATUS
beeper -ACC_CALIBRATION
beeper -ACC_CALIBRATION_FAIL
beeper -READY_BEEP
beeper -DISARM_REPEAT
beeper -ARMED
beeper -SYSTEM_INIT
beeper -ON_USB
beeper -BLACKBOX_ERASE
beeper -CRASH_FLIP
beeper -CAM_CONNECTION_OPEN
beeper -CAM_CONNECTION_CLOSE
beeper -RC_SMOOTHING_INIT_FAIL

# beacon
beacon RX_LOST
beacon RX_SET

# map
map TAER1234

# serial
serial 0 0 115200 57600 0 115200
serial 3 64 115200 57600 0 115200

# aux
aux 0 0 1 1700 2100 0 0
aux 1 13 0 1700 2100 0 0
aux 2 26 0 1700 2100 0 0
aux 3 35 2 1700 2100 0 0

# master
set gyro_lowpass2_hz = 225
set dyn_notch_width_percent = 0
set dyn_notch_q = 250
set dyn_notch_min_hz = 70
set dyn_notch_max_hz = 350
set dyn_lpf_gyro_min_hz = 180
set dyn_lpf_gyro_max_hz = 450
set acc_hardware = AUTO
set acc_calibration = -87,-4,55,1
set rssi_channel = 8
set rc_smoothing_auto_smoothness = 20
set serialrx_provider = CRSF
set blackbox_p_ratio = 64
set min_throttle = 1070
set dshot_idle_value = 500
set dshot_bidir = ON
set use_unsynced_pwm = OFF
set motor_pwm_protocol = DSHOT300
set motor_pwm_rate = 480
set vbat_max_cell_voltage = 420
set vbat_min_cell_voltage = 329
set vbat_warning_cell_voltage = 348
set small_angle = 180
set yaw_deadband = 5
set pid_process_denom = 2
set osd_units = IMPERIAL
set osd_tim1 = 2561
set osd_vbat_pos = 340
set osd_rssi_pos = 2478
set osd_link_quality_pos = 429
set osd_tim_1_pos = 267
set osd_tim_2_pos = 322
set osd_vtx_channel_pos = 355
set osd_current_pos = 371
set osd_craft_name_pos = 2095
set osd_warnings_pos = 233
set osd_avg_cell_voltage_pos = 2509
set osd_stat_tim_1 = ON
set osd_stat_tim_2 = OFF
set osd_stat_max_spd = OFF
set osd_stat_bbox = OFF
set osd_stat_bb_no = OFF
set gyro_rpm_notch_q = 800
set name = AIRSHOT

profile 1

# profile 1
set dyn_lpf_dterm_min_hz = 63
set dyn_lpf_dterm_max_hz = 153
set dterm_lowpass2_hz = 135
set p_pitch = 78
set i_pitch = 95
set d_pitch = 33
set p_roll = 71
set i_roll = 95
set d_roll = 31
set p_yaw = 77
set i_yaw = 95
set d_min_roll = 0
set d_min_pitch = 0

rateprofile 0

# rateprofile 0
set rates_type = ACTUAL
set roll_rc_rate = 8
set pitch_rc_rate = 8
set yaw_rc_rate = 8
set roll_expo = 60
set pitch_expo = 60
set yaw_expo = 60
set roll_srate = 60
set pitch_srate = 60
set yaw_srate = 60

HYPERLOW AIRSHOT

Price

Availability:

Choose Options

Related Items