Classic unibody style with a Hyperlow twist:
This freestyle frame gives you ultimate control over weight distribution and CoG by not only allowing the use of any size standoff (down to a Hyperlow 10mm) but also offering a reversible build orientation for a true mid-mount set up.
The removable camera bumper can be attached to the 2mm 'top plate' for an undercarriage conversion after flipping the frame. ESC's then secured to the underside of the arms render them immune to prop strikes. A simple but effective 1.5mm battery mounting plate allows for double strap maximum battery security keeping your lipos perfectly safe. With the battery weight lowered into the prop plane, the mid-mount setup gives you the locked in feel of a top mount combined with much smoother handling and effortless transitions. Your P's will never be the same.
For pilots who may prefer a traditional top mount build for stylistic or practical reasons, the slotted top plate also provides for dual battery strap use while allowing you raise or lower the plate, and battery, to any height you choose. Fit your AIO flight controller, double stack PDB and FC, or even a power cube easily at 10mm, 15mm, 20mm, or higher.
The main plate is 4mm twill carbon fiber, refined to offer minimal resistance and maximum durability after countless design iterations from hours in the air (and in the ground). Special attention has been made to widen the shoulders of the arms, while the mounting points offer protection for even the largest of new motors.
TPU camera mounts are included to house full size cams and add front bumper protection, while the additional GoPro Session mount
offers complete security from above. The subtly stretched X motor layout provides additional protection from ground strikes at the front, while also offering increased sustained roll ability through turns. This thing carves!
So whether its your first frame or your fiftieth, the Unibody has you covered in both durability and performance. Truly a no nonsense build that lets you fully control its profile, and just like its Modular brother, go twice as low as others on the market (and then some!)
GoPro Session mount available HERE *Hyperlow frames are designed around an HS1177 style camera body. To ensure perfect compatibility, you can transfer your cam internals to THIS CASE. A Swift MINI can be mounted with THESE and a Swift MICRO can be mounted with THESE